Bidet Co UK
Company
Shop by Category
Bidet Guides
T&Cs
Shop Online
  • Free UK delivery on orders of £75 or more
  • Hand bidets, toilet attachments and bathroom accessories in one place
  • Delivery in 5-7 days after a 24-48 hour handling time
  • 15 days to return an unused item

Toilet Seat and Bidet | Bidet Seats | Bidet Toilet Seat

Toilet Seat and Bidet

£129 £159 Save £30
  • Front And Rear Wash
  • No Plug Needed
  • Two Seat Shapes
  • Free UK Delivery

Shape: D Shape Seat

Price: £129 £159

  • Delivery time: 5-7 days after a 24-48 hour handling time
  • Free delivery across the UK on orders £75+, otherwise a flat £25
  • Pay by card or PayPal, handled by the payment provider
  • 15 days to change your mind, plus your statutory rights
Product specifications
TypeNon electric bidet toilet seat and lid. Replaces your existing seat.
ShapesD Shape Seat and O Shape Seat, same price
PowerNone. Runs on cold mains water from the supply to your cistern.
Wash modesRear wash (single-hole nozzle) and front wash (four-hole nozzle), each with its own nozzle
ControlOne lever on the side of the seat, marked Rear and Lady
Nozzle cleaningSelf-cleaning before and after each use, as stated on the listing
LidSlow close, damped hinge
Seat removalQuick release. The seat unclips from its mounting plate for cleaning.
MaterialPP (polypropylene) plastic
ColourWhite
D Shape Seat size500 mm long, 365 mm wide, 85 mm high at the hinge end. Opening 292 mm by 215 mm.
O Shape Seat size475 mm long, 365 mm wide, 89 mm high at the hinge end. Opening 275 mm by 219 mm.
D Shape Seat fits pans432 mm to 480 mm from the seat bolt holes to the front of the rim, with at least 50.8 mm between the bolt holes and the cistern
O Shape Seat fits pans406 mm to 457 mm from the seat bolt holes to the front of the rim
Bolt hole spacing134 mm to 180 mm, both shapes
In the kitSeat and lid, braided hose, T-valve, mounting plate, two bolts with fixings
WeightNot published by the supplier
Shipping & returns

Tracked delivery anywhere in the UK. It is free on orders of £75 or more, and a flat £25 below that. Express delivery is £25 at any basket value. Allow 5 to 7 days, after a 24 to 48 hour handling time.

You have 15 days from delivery to change your mind, a day longer than the 14 days the Consumer Contracts Regulations 2013 give you. Send it back unused, in its original packaging, and we refund the price you paid, including standard delivery. There is no cancellation or handling fee. You cover the return postage unless the item is faulty or wrong.

If it arrives faulty, damaged or not as described, we put it right under the Consumer Rights Act 2015 with a repair, a replacement or a refund, return postage included.

Shipping details · Refunds and returns

Looking after it

Wipe the seat and lid with a soft cloth and a mild cleaner, nothing abrasive. Unclip the seat from its mounting plate now and then to clean the rim and the plate underneath.

Front And Rear WashTwo nozzles, worked by one lever on the side
No Plug NeededRuns on the cold supply that fills your cistern
Two Seat ShapesD shape or O shape, same price, measure first
Free UK DeliveryOrders of £75 or more ship free, this seat included

A toilet seat with a bidet built in and nothing to plug in.

Front and rear wash nozzles on one side lever, a slow close lid and a seat that unclips for cleaning. Available as a D shape or O shape seat.

This is a toilet seat and lid with a bidet built into it. Your old seat comes off and this one bolts on in its place.

It is non electric. There is no plug, no battery and no heater. Water comes from the cold supply that already fills your cistern, through a T-valve and a braided hose.

One lever on the side does the work. Turn it one way for the rear wash and the other way for the front wash. Each has its own nozzle.

The lid closes slowly on a damped hinge, and the seat unclips from its mounting plate when you want to clean underneath.

It comes as a D shape or an O shape seat at the same price. Measure your toilet before choosing.

Toilet Seat and Bidet

A bidet seat is the tidy way to add a bidet to the toilet you already have. The ordinary seat comes off, this one goes on, and from the front it still looks like a plain white seat and lid.

Toilet Seat and Bidet

There is no electricity involved. A T-valve fits on the cold supply to your cistern and a braided hose carries water to the side of the seat. The rinse is cold mains water, and there is nothing to plug in or charge.

Toilet Seat and Bidet

One lever does the work. Turn it one way for the rear nozzle, which has a single hole, or the other way for the front nozzle, which has four small holes for a softer spray. The markings around the lever step up as you turn, so you can start gently.

Toilet Seat and Bidet

The listing says the nozzles rinse themselves before and after each use. The seat also unclips from its mounting plate, so cleaning underneath it takes a click rather than a screwdriver.

Toilet Seat and Bidet

The lid closes on a damped hinge, so it settles instead of slamming. Handy at night, when nobody else in the house needs to know you are up.

Toilet Seat and Bidet

Choose the D shape or the O shape to match your pan. Measure your toilet before choosing, from the seat bolt holes to the front of the rim, and check the figures in the specification.

Not sure yet? That is fine.

You can change your mind. You have 15 days from delivery, longer than the 14 days the Consumer Contracts Regulations 2013 give you, and there is no cancellation or handling fee. Send it back unused and we refund the price you paid, including standard delivery.

If it turns up faulty, damaged or not as described, that is on us. The Consumer Rights Act 2015 covers you, we pay the return postage, and you can have a repair, a replacement or your money back. Read the full detail on our refunds and returns page, or ask us anything before you order.

Frequently Asked Questions

What is the Toilet Seat and Bidet?

It is a white toilet seat and lid with two wash nozzles built in. A lever on the side sends cold water from your cistern supply through the nozzles for a front or rear rinse.

Does it replace my existing toilet seat and lid?

Yes. Your old seat comes off and this one bolts on through the two seat holes at the back of the pan, using the mounting plate in the kit.

Does it need electricity or batteries?

No. It is non electric and has no batteries. It works on the water pressure of the cold supply that fills your cistern.

Is the water warm?

No, it is cold. It comes from the same cold supply as your cistern, and there is no heater in the seat.

Does it have a heated seat, a dryer or a remote control?

No. Those all need power, and this seat has no electrics. Pat dry with a little toilet paper or a towel afterwards.

What is the difference between the D Shape Seat and the O Shape Seat?

The O shape is the round seat, 475 mm long. The D shape is a longer seat with a straighter back edge, 500 mm long. Both are 365 mm wide, work the same way and cost the same.

How do I measure my toilet before choosing a shape?

Measure from the seat bolt holes at the back of the pan to the front edge of the rim. The supplier's diagrams give 432 mm to 480 mm for the D shape and 406 mm to 457 mm for the O shape.

What if my toilet measures within both ranges?

The ranges overlap between 432 mm and 457 mm. In that gap, look at the rim: a round pan suits the O shape, and a longer pan with straighter sides suits the D shape.

Do the D shape and O shape cost the same?

Yes. Both are £129, down from £159, so you can choose on fit alone.

How far apart should the seat bolt holes be?

The supplier's diagrams show bolt holes 134 mm to 180 mm apart for both shapes, measured between the two holes.

Will it fit a one-piece toilet?

Some, yes. The supplier's diagram shows it fitting standard two-piece toilets and some one-piece toilets, but marks one-piece designs where the cistern runs straight down into the pan as may not fit.

How big is each seat?

Per the supplier's diagrams, the D Shape Seat is 500 mm long, 365 mm wide and 85 mm high at the hinge end. The O Shape Seat is 475 mm long, 365 mm wide and 89 mm high.

What comes in the box?

The kit shown on the listing has the seat and lid, a braided hose, a T-valve, a mounting plate, and two bolts with their fixings. Everything needed to connect it is included.

How does it connect to the water supply?

A T-valve goes on the cold supply pipe to your cistern. The braided hose runs from the T-valve to the inlet on the side of the seat, and the cistern keeps filling as normal.

Do I need a plumber to fit it?

Fitting it means adding a T-valve to the cold supply to your cistern. Installation and backflow requirements apply to a bidet seat connected to the mains, so follow the product instructions and the water regulations where you live, and use a qualified plumber if you are unsure.

How do I switch between the front wash and the rear wash?

Turn the lever on the side of the seat one way for the rear wash and the other way for the front wash. The dial is marked Rear and Lady. Turn it back to the middle to stop the water.

Can I change how strong the spray is?

The markings around the lever step up in size in each direction, so start with a small turn and go further for more. The top strength is set by your mains pressure.

Why does the front nozzle have four holes?

Four small holes spread the water into a softer spray for the front wash. The rear nozzle has a single hole for a narrower stream.

Do the nozzles clean themselves?

The listing says the nozzles rinse themselves before and after each use. Give the nozzle housing a wipe when you clean the rest of the seat too.

Is the lid slow closing?

Yes. The lid has a damped hinge, so it lowers slowly and quietly instead of dropping onto the seat.

How do I clean it?

Wipe the seat and lid with a soft cloth and a mild cleaner. The seat unclips from its mounting plate, so lift it off now and then to clean the rim and the plate underneath.

What is the seat made of?

The seat and lid are PP (polypropylene) plastic, according to the supplier's product images. The hose supplied with it is braided.

What colour is the seat?

White. Both shapes are white, and the listing offers no other colour.

Will it work if my water pressure is low?

The seat has no pump, so the spray is only as strong as your cold supply. On a low pressure supply, expect a gentler rinse.

How is it different from the Bidet On The Toilet attachment?

The Bidet On The Toilet attachment fits under the seat you already have. This one replaces the seat and lid, with the nozzles and a slow close lid built in, and it costs more.

How is it different from a handheld bidet?

A handheld bidet is a spray head on a hose that you hold and aim yourself. This seat is hands free: you turn a lever and the nozzles do the aiming.

Will I use less toilet paper with it?

Yes, usually. Rinsing with water first means you only need a little paper, or a towel, to pat dry afterwards.

How much is delivery on this seat?

Nothing within the UK. Delivery is free on orders of £75 or more, and this seat costs £129. An express option is available for £25.

How long does delivery take?

Orders ship after a 24 to 48 hour handling time, then arrive in 5 to 7 days anywhere in the UK.

Can I return it if I order the wrong shape?

Yes. You have 15 days from delivery to return it, one more than the 14 days the Consumer Contracts Regulations 2013 give you to cancel. There is no cancellation fee and no handling fee.

Buying Guide

6 min read Bidet Co UK

This is a toilet seat and lid with a bidet built into it. Your old seat comes off, this one bolts on in its place, and a lever on the side gives you a rinse with water after you have been. It runs on the cold supply to your cistern, so there is nothing to plug in.

What it is

From the front it looks like an ordinary white toilet seat and lid. The difference is at the back of the seat opening, where two wash nozzles sit in a small housing.

One nozzle is for the rear wash and has a single hole. The other is for the front wash and has four small holes, which spread the water into a softer spray. The dial on the side labels them Rear and Lady.

The seat is PP (polypropylene) plastic. It is non electric, so there is no heater and no dryer. The water is cold, the same water that fills your cistern.

What is in the kit

The kit shown on the listing has:

  • the seat and lid, with the nozzles built in
  • a braided hose
  • a T-valve for the cold supply to your cistern
  • a mounting plate
  • two bolts with their fixings

Everything needed to connect it is in the box, so there is nothing extra to buy.

How it connects

The seat fixes to the pan through the two seat bolt holes at the back, using the mounting plate. On the water side, the T-valve goes on the cold supply pipe that feeds your cistern. The cistern still fills as normal, and the braided hose carries water from the T-valve to the inlet on the side of the seat.

Installation and backflow requirements apply to anything like this that connects to the mains next to a toilet. Follow the product instructions and the water regulations where you live, and use a qualified plumber if you are unsure about any part of the job.

D shape or O shape

The seat comes in two shapes at the same price. The O shape is the round one. The D shape is a longer seat with a straighter back edge, closer to the letter it is named after.

Measure your toilet before choosing, from the seat bolt holes to the front edge of the rim. The supplier's fitting diagrams give:

  • D Shape Seat: pans 432 mm to 480 mm. The seat is 500 mm long, 365 mm wide and 85 mm high at the hinge end.
  • O Shape Seat: pans 406 mm to 457 mm. The seat is 475 mm long, 365 mm wide and 89 mm high at the hinge end.

Both shapes need bolt holes 134 mm to 180 mm apart. The D shape diagram also asks for at least 50.8 mm between the bolt holes and the cistern, so the hinge housing has room.

The two ranges overlap between 432 mm and 457 mm. If your toilet lands in that gap, look at the outline of the rim: a round pan suits the O shape, a longer pan suits the D shape. The diagrams also show that some one-piece toilets, where the cistern runs straight down into the pan, may not fit.

Using it

Sit down as normal. Turn the lever one way for the rear wash or the other way for the front wash, then turn it back to stop. The markings around the lever step up in size in each direction, so start with a small turn and go further if you want more. The strength also depends on your mains pressure, because the seat has no pump.

Pat dry with a little toilet paper or a towel afterwards. Rinsing first means you get through less toilet paper than wiping alone.

Cleaning and care

The listing says the nozzles rinse themselves before and after each use. For the rest, wipe the seat and lid with a soft cloth and a mild cleaner. The seat unclips from its mounting plate, so you can lift it off, clean the rim and the plate underneath, then click it back on.

The lid closes slowly on a damped hinge instead of dropping. That matters most at night, when nobody else in the house wants to hear it.

Which one from our range

  • You want the bidet built into the seat and hands free: this seat.
  • You like your current seat: the Bidet On The Toilet attachment fits under it.
  • You would rather aim the water yourself: a handheld bidet on a hose.
  • You want something for travel: the portable bidet sprayer runs on batteries, not the mains.

Delivery and returns

At £129 this seat qualifies for free UK delivery, which applies to orders of £75 or more. Orders ship after a 24 to 48 hour handling time and arrive in 5 to 7 days. You can pay by card or PayPal.

If you order the wrong shape, you have 15 days from delivery to return it. UK law gives you 14 days to cancel under the Consumer Contracts Regulations 2013, and faulty goods are covered by the Consumer Rights Act 2015. There is no cancellation fee and no handling fee.

Browse the shop

Not sure which one you need?

Tell us the toilet, the bathroom and the water supply you are working with, and we will tell you what fits before you buy. Free delivery across the UK on orders over £75.

Ask us a question

Page summary

Toilet Seat and Bidet, also called a bidet seat, bidet toilet seat or non electric bidet seat, sold by Bidet Co UK at buttwasher.net for £129 (regular price £159). It comes in two shapes at the same price: D Shape Seat and O Shape Seat. It replaces the existing toilet seat and lid with a white PP (polypropylene) seat that has two wash nozzles built in: a rear wash nozzle with a single hole and a front wash nozzle with four holes, both worked by one lever on the side of the seat. It is non electric, with no heater, dryer or remote. It connects through a T-valve fitted to the cold supply to the cistern and a braided hose to the seat inlet, so the water is cold and the spray strength depends on mains pressure. The listing states the nozzles self-clean before and after each use, the lid is slow closing, and the seat unclips from its mounting plate for cleaning. The kit shown on the listing contains the seat and lid, a braided hose, a T-valve, a mounting plate and two bolts with fixings. The supplier's fitting diagrams give the D Shape Seat as 500 mm long, 365 mm wide and 85 mm high, for pans 432 mm to 480 mm from the bolt holes to the front rim, and the O Shape Seat as 475 mm long, 365 mm wide and 89 mm high, for pans 406 mm to 457 mm. Bolt holes must be 134 mm to 180 mm apart. Some one-piece toilets may not fit. Weight is not published. Installation and backflow requirements apply: follow the product instructions and the water regulations where you live, and use a qualified plumber if unsure. Delivery is free across the UK on orders of £75 or more (otherwise £25, express £25); orders ship after a 24 to 48 hour handling time and arrive in 5 to 7 days. Payment by card or PayPal. Returns are accepted within 15 days of delivery; the Consumer Contracts Regulations 2013 give 14 days to cancel, and faulty goods are covered by the Consumer Rights Act 2015. No cancellation or handling fee.